SMART BOARD 8055i-G5, Administrator'S Manual

Page: 42 / 84

CHAPTER 5
MAINTAINING THE INTERACTIVE FLAT PANEL
32 smarttech.com/kb/171000
6. Lift the interactive flat panel from its mounting location.
WARNING
Do not place the interactive flat panel on a sloping or unstable cart, stand or table, because
the interactive flat panel could fall, resulting in injury and severe product damage.
CAUTION
Do not leave the interactive flat panel face up, face down or upside down for an extended
period, because it could cause permanent damage to the screen.
7. Remove the mounting brackets.
Transporting the interactive flat panel
Save your original packaging so that you can repack the interactive flat panel with as much of the
original packaging as possible. This packaging was designed to provide the best possible
protection against shock and vibration. If the original packaging isn’t available, you can purchase
the same packaging directly from your authorized SMART reseller ( smarttech.com/where ).
CAUTION
Transport the interactive flat panel only in original or replaced packaging. Transporting the
interactive flat panel without correct packaging can lead to product damage and voids the
warranty.