5
INSTALLATION PRECAUTIONS
Noise Interference may result if this product is placed too close to an operating television set
or a computer, or if it is placed on top of another amplifier or a power conditioner product.
High temperatures are detrimental to the performance and longetivity of electronic equip-
ment. Do not place this amplifier too close to high temperature devices. Do not block the heat
sinks or top cover vent holes.
The weight of this amplifier is approximately 23 pounds. Make sure the location of the ampli-
fier can properly support this weight.
CONNECTIONS
Power
Connect the power cord IEC plug into the power connector. Make sure it is fully seated. Since
this is a detachable power cord, you may substitute a premium power cord of your choice if
you desire.
Line Level Inputs
The amplifier inputs are gold-plated RCA jacks. They are floating. This means that the ground
connections on the jacks are isolated from the chassis and AC grounds. This is done to mini-
mize the possibility of hum caused by ground loops.
Amplifier Outputs
The SPEAKER connections are made on gold-plated 5-way binding posts. You may use banana
plugs, bare wires, or spade lugs to connect to these binding posts. It is important to tighten
these connections properly. These connections carry high current, and any looseness may
result in poor sound quality. If you have difficulty inserting wires into the post holes, simply
remove the fuse holder caps temporarily to obtain more room in which to work.
Power Connector
Input Level Controls
Line Inputs
Amplifier Outputs
Speaker Fuses
Mono Bridge Switch
Ground Lift Switch
Power Fuse
