![SMART 2016 fortwo Owner'S Manual Download Page 159](http://html1.mh-extra.com/html/smart/2016-fortwo/2016-fortwo_owners-manual_1295024159.webp)
G
WARNING
The tire sealant is harmful and causes irri-
tation. It must not come into contact with
your skin, eyes or clothing or be swallowed.
Do not inhale TIREFIT fumes. Keep tire
sealant away from children. There is a risk
of injury.
If you come into contact with the tire seal-
ant, observe the following:
R
Rinse off the tire sealant from your skin
immediately with water.
R
If the tire sealant comes into contact
with your eyes, immediately rinse them
thoroughly with clean water.
R
If tire sealant is swallowed, immediately
rinse your mouth out thoroughly and
drink plenty of water. Do not induce vom-
iting, and seek medical attention imme-
diately.
R
Immediately change out of clothing
which has come into contact with tire
sealant.
R
If an allergic reaction occurs, seek med-
ical attention immediately.
!
Do not operate the tire inflation com-
pressor for longer than 15 minutes at a time
without a break. It may otherwise overheat.
The tire inflation compressor can be oper-
ated again once it has cooled down.
Comply with the manufacturer’s safety
instructions on the sticker on the tire infla-
tion compressor.
Using the TIREFIT kit
X
Do not remove any foreign objects which
have penetrated the tire, e.g. screws or
nails.
X
Remove the tire sealant bottle and the tire
inflation compressor from the front-
passenger footwell (
Y
page 156).
X
Affix the 50 mph (80 km/h) maximum per-
missible speed sticker to the instrument
cluster within the driver's field of vision.
X
Unwind plug
:
with the cable from the tire
inflation compressor
;
.
X
Remove hose
A
from the bottom section of
tire inflation compressor housing
;
.
X
Remove cap on tire sealant bottle
?
and
connect hose
A
.
X
Remove the cap from valve
E
on the faulty
tire.
X
Remove cap on filler hose
=
and screw
filler hose
=
onto the valve.
X
Insert connector
:
into the 12 V socket in
your vehicle (
Y
page 143).
X
Turn the SmartKey to position 1 in the igni-
tion lock (
Y
page 86).
X
Press on/off switch
B
on tire inflation
compressor
;
to I.
The tire inflation compressor is switched
on. The tire is inflated.
i
First, tire sealant is pumped into the
tire. The pressure can briefly rise to
approximately 600 kPa (6.0 bar/86 psi).
Do not switch off the tire inflation com-
pressor during this phase.
X
Let the tire inflation compressor run for a
maximum of 15 minutes. The tire should then
have attained a pressure of at least 180 kPa
(1.8 bar/26 psi).
Flat tire
157
>>
Breakdown
assistance
.
Z