1
.
Click FACTORY SETTING icon to enter factory setting page.
1.1 Factory setting page required password to enter.
Please key in password
****
1.2
After click the KEY icon the white cursor will show at below of the rectangle.
After that, key in the password (1234) to enter the page.
1.3
The RESET function will reset all the parameter to factory original setting.
There will be a confirmation after clicking the reset button. The alignment
calibration is required after reset.
1.4
Click the driller icon will enter the page for key in the width of the cutting bit.
This setting only required after change different cutting bit.
Please key in password
mm
mm
1 4.1 Press the rectangle which have the length of cutting bit.
.
1 4.2 Key in the number of the cutting bit width from the keypad. Click enter button
after key in the number.
.
1 4.3 Press EXIT ICON to back to the factory setting page.
.
19.0
Page 1
RESET
RESET
mm
XY-HOME
OFF SET
X:
mm
mm
Y:
EXIT
O
ffset
Are you sure to reset all Data?
YES
NO
19.0
