COMMERCIAL PROGRAMMING MODE
24
Heat
Heat Set
PM
Day
E
Mode selection
The 44-800 can control both heating and cooling. Touch the Mode box to cycle through and
select available modes. Based on equipment and thermostat configuration, mode selection
can be as follows:
Off
- Thermostat will not call for heating
or cooling.
Heat
- Thermostat only controls heating.
When heating system is running,
Heat
flashes.
Cool
- Thermostat only controls cooling.
When cooling system is running,
Cool
flashes.
Auto
- Thermostat controls both heating
and cooling.
Heat
or
Cool
will flash when
equipment is running.
E. Heat
- Emergency heat for heat pump
systems should the compressor fail.