10 |
FRU-20-01032-20
– REPLACING THE LAMP ON YOUR SMART TABLE ST230I
20-01032-20
Resetting the Lamp Timer
After you replace the lamp, reset the lamp timer.
To reset the lamp timer
1. Press the remote control’s power
button.
The projector turns on.
NOTE
The projector remote control is secured to the inside of the table enclosure
above the projector.
2. Wait five minutes for the projector to warm up.
3. Press DOWN, UP, UP, LEFT, UP (DUULU) on the remote control to access the
service menu.
4. Using the remote control, select the
Lamp Hour Reset
option, and then
press
OK
.
Both
Lamp Hour
values (
Standard
and
Economy
) are reset to zero.
NOTE
You are unable to reset the
Display Hour
value because it displays the total
hours the projector has been in use.
5. Press the
Menu
button on the remote control.
The
SMART UF55 Settings
menu appears.
6. Select to
confirm
that
Lamp Hours
has been reset to zero.
The system is ready to use.
7. Return the remote control to its original placement inside the table enclosure.
