Smart Technologies SMART Meeting Pro 3.1 SP1, System Administrator Manual

Page: 71 / 94

Chapter 8: Removing the software
Using the command line interface 65
Using third-party imaging or remote management software 70
You can remove SMART software using the command line interface.
OR
You can remove SMART software using third-party imaging or remote management software.
Using the command line interface
Using the command line interface, you can remove SMART software in many ways, including
running commands from the Command Prompt window and including commands in batch script files.
I M P O R T A N T
Remove the common platform only after you remove all other SMART software.
g
To remove SMART Meeting Pro software
Run the following command:
msiexec /x " [Path] \SMART Meeting Pro.msi" [Parameter]
Where
o
[Path] is the path to the SMART Meeting Pro.msi file.
o
[Parameter] is the installation parameter (see Parameters on page 80).
OR
Run the following command to remove the software using the product code:
msiexec /x [Product code] [Parameter]
Chapter 8
65