PLEASE NOTE: SmartPACK can't be seen as an ELECTRONIC
component since it don't make any change to the batteries endings
voltages.
Checklist
It's suitable to follow the following checklist before start working:
1. Ensure that the battery has been properly installed in the appropriate housing.
2. Check that all the knobs are properly tightened checking also every possible
structural play.
3. Check that every power supplying connecter is properly connected and that the
fixing sleeves are tightened enough.
4. Check the fuse on the floating Battery Plate's side
Fuses
In case of accidental short circuit our kit is equipped with a replaceable security fuse for
every battery. If the replacement will be necessary, use only fast-blow fuses 5A.
Materials
SmartPACK is made with the following materials (in various percentages) :
•
Aluminium 6082
•
Carbon Fibre
•
Steel C40
•
Steel FE360B
Materials and treatments to which the materials have been submitted for fabrication are
compatible with the current
ROHS
directive.
Third parties components have been certified from their respective manufacturers
10
Summary of Contents for SMARTCAM Series
Page 1: ...1 v 1 1 ...
