Combo heart rate monitor & watch
6
QuiCK start for Continuous heart rate
The Chest Strap Transmitter provides constant heart rate
display throughout the duration of your workout. To ensure
a proper heart rate reading, the chest transmitter must be
properly adjusted:
1. Fasten the watch snugly around your wrist.
2. Connect the elastic belt to the transmitter unit and secure
around your chest (See below).
3. Adjust the strap so that the transmitter fits snug (but not
constricting) below the pectoral muscles (See below).
4. Position the electrodes, as shown in the drawing (See
below).
5.
press the mode
key to advance to Heart Rate/
Chronograph mode. The watch will automatically search
for a heart rate signal in about 8 seconds.
6. Heart rate will display in beats per minute (BPM) along
with your % of maximum heart rate.
tip:
In dry and cold climates it may take a
few minutes for a layer of perspiration to
form between the chest strap and the skin.
moistening the electrodes with water or ecg
conductive gel can speed up this process.
eleCtrodes
2.
3.
4.
