Sunjet 150
,QVWUXFWLRQ0DQXDO
Please note:
In winter the Sunjet 150 must be stored in a dry and frost proof
environment. Alternatively, an optional adapter can be purchased
for occasional indoor use.
The pump must never be operated dry (out of water) as this will
have a permanent adverse affect on the performance of the
pump.
Spare parts
1. Solar panel
21310AS01
2. Panel mounting kit
MTGKIT
3. Pump
21400P01
4. Pump impeller
IMPELLER
5. Pump cover
PCOVER
6. Base with filter
21400BASE
7. Fountain head set
2150FH
Full 2 year warranty
If within 24 months from the date of purchase this product fails
due to a defect in material or workmanship, Smart Solar will
replace or repair free of charge.
Please report immediately if there is any damage or missing
pieces upon receipt of goods.
The warranty does not apply to:
Damage caused by accidents, abuse, poor handling, frost or
normal wear and tear. Products which have been subject to
unauthorized repair or modification.
For further information please contact your nearest customer
service centre detailed on the last page of this manual.
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
Smart Solar reserve the right to modify any product to enhance
its’ performance and design.
ENGLISH
Please Note:
We recommend you use distilled or rain water to
prevent scale build up.
Select a suitable location for you solar panel and fix the mounting
as shown. Connect the panel and pump together.
IMPORTANT
To ensure the seal remains water-tight twist the pump and panels
connectors together rather than merely pressing them together.
The Sunjet 150 is now ready to use.
Please note:
On first use there maybe air in the pump. It can take
up to 5 minutes until all the air is expelled and water begins to
sprinkle through the fountain head.
Cleaning and Maintenance
Pump:
If, after a period of time, the pump starts to lose power or
stops working check for the build up of sediment, scale or dirt in
the filter and in the bottom of the pump housing. Remove the
pump cover at its’ base. Take out the impeller and remove any
sediment, scale or dirt that has built up. Replace the impeller and
replace the pump cover.
Solar panel:
The panel should be cleaned periodically with a soft
tissue and proprietary glass cleaning solution. Regular cleaning of
the panel is advised to maintain optimum conversion of the sun’s
energy into direct current.
Trouble Shooting
If you have any problems please contact Smart Solar before
returning to the place of purchase. For immediate answers visit
our website
www.smartsolar.com
where you will find an
extensive trouble shooting section with frequently asked questions
and instant email enquiry forms.
Pump does not operate even though the solar panel is in full
sunlight
1) Check the connection of the pump to the solar panel. If loose
then re-connect, rotating the connectors until good contact is
made. If any of the cabling is damaged then seek a replacement.
2) Check whether the impeller is blocked by removing the pump
cover. If it is, then clean the pump as detailed above.
Pump does operate but there is no water running through the
hose
1) Check for the build up of sediment, scale or dirt in the filter and
in the bottom of the pump housing as detailed above.
2) Check whether the pump cover is attached properly. If the
pump cover is not pushed down tightly, the pump will not push
water through the fountain.
Solar panel & Stand Kit
Fixing The Panel Holder
Stand Mounted Solar Panel
Standing Solar Panel
Wall Mounted Solar Panel
