6
1. Open the cover, remove the ice basket and pour water into the water reservoir.
Keep water level below the level mark.
2.
Press “ON/OFF” button on the control panel to turn on unit and begin the ice making cycle.
3.
Select the size of the ice cube by pressing the “Select” button. There are 3 sizes: SMALL,
MEDIUM or LARGE can be selected:
SMALL
MEDIUM
LARGE
If the room temperature is lower than 60
℉
, it is recommended to select the small or
medium ice sign button in order to avoid ice sticking together.
4. The ice making cycle lasts 6 to 15 minutes depending on the size of the ice cube selection
and the ambient temperature in your room. In very high room temperatures, ice making
time may be longer than normal.
5. While the icemaker is on, verify water level periodically. If water pump cannot inject water,
the ice
maker will stop automatically, and the “
” symbol will flash in LCD display window.
Fill water up to
the level mark and press “ON/OFF” button two times again to turn on the
unit again. Allow the refrigerant liquid inside the compressor at least 3 minutes to settle
before restarting.
6. The ice maker automatically stops working when the ice basket is full and the
“
” symbol
will display in the LCD display widow.
7. Change water in the water reservoir every 24 hours. If unit is not in use, drain all water left
in the tank and clean.
Timer Delay Time Range: 0.5-19.5 hours. Default Delay Time: 3 hours.
When the unit is running, you can set the unit with OFF-TIMER to set the unit to stop running
after your set delay time.
When the unit is stopped, you can set the unit with ON-TIMER to set the unit to start to run
automatically after your set delay time.
USING YOUR ICE MAKER
MAKING ICE CUBES
TIMER SETTING