a
b
LED Indicators
Insert Battery
Quick Start User Guide
•
Before using your Smart PowerCharger™,
be sure to read this guide along with safety
precautions.
•
Familiarize yourself with how to use the charger
properly.
•
For future reference, keep this guide handy.
SPC4000
4. The charger’s LED’s indicators on
top of the unit will cycle from RED
to Green. Once the LED’s are static
Green, the unit is in CHARGE MODE.
1. Unpack the
charger and place
in a DRY area for
operation.
2. Connect the POWER
CORD to the side of
the charger labeled AC
Power Connection
(AC 100V – 240V).
3. Turn “ON”
the Power
Switch.
In your box:
a. SPC4000
b. Power Cord
*Note: For extended life of your batteries, it is recommended
that you DEEP CYCLE your batteries following 5 to 10 flight
cycles. DEEP CYCLE your batteries when it is 30% capacity or
below. The best time to DEEP CYCLE your batteries is overnight.
1. Insert the battery into the charging slot. The
SPC4000 will communicate with the battery and
send the battery into CHARGE MODE automatically.
3. Remove the battery and turn
OFF the SPC4000.
1. Insert the battery
into the charging slot.
The SPC4000 will
communicate with the
battery and send the
battery into CHARGE
MODE automatically.
The battery’s green LED
will be blinking until
fully charged.
2. When the battery’s green LED’s
are OFF, it is fully charged.
QUICK START USER GUIDE
CHARGING YOUR BATTERIES
DEEP CYCLE DISCHARGING
