SmartWatch
| User Guide 3
Reset your SmartWatch
- follow these stepsto reset the watch into “Recovery Mode”
•
PW Model
:
- Press and hold down the top left button, top right button, and middle right
button of your SmartWatch for 30 seconds. Until you see “Loading”
- This will put your Smartwatch in “Recovery Mode”
- If your Smartwatch does not connect automatically to your phone, manually
connect to it through the Pebble App
- Go through the update process as you are guided on the Pebble App
- After the update process is complete you should automatically be connected to
the SmartWatch app
•
PT Model
:
- Press and hold down the top left button, top right button, and middle right
button of your SmartWatch for 5-10 seconds. Until you see “Pebble”
- This will put your Smartwatch in “Recovery Mode”
- If your Smartwatch does not connect automatically to your phone, manually
connect to it through the Pebble App
- Go through the update process as you are guided on the Pebble App
- After the update process is complete you should automatically be connected to
the SmartWatch app
Care of Your SmartWatch
•
Avoid prolonged exposure to water, steam, strong magnets and electrical fields
•
Avoid submerging the SmartWatch in water
•
When you get a Low Battery warning on the watch, charge it promptly
•
Charge your SmartWatch daily
