SMART MAX GEOSYSTEMS MG970, User Manual, Page: 14 / 25

14 / 25
Ⅲ Connected to the PC
3.1 Connection Assistant software
1. First power on the mainframe and computer, then connect the 7 pin cable to the
mainframe, the USB and serial port which in the other side of the 7-pin cable
connected to the computer, there will be a hot swap icon(Figure 3-1) in the task bar.
Fig 3-1
hot swap icon
2. Open the assistant software, click on the Connect icon and select the correct serial
port.
Fig 3-2 assistant software
3. Once connected successful, you can view the mainframe information (Figure 3-3).