9-Port Full HD Multiviewer for a Single Monitor
6
System operation
When selecting a channel by pressing buttons 1-9 on the front panel, the Blue backlight LED will light
up to indicate that input is selected for output 1.
Selecting Viewing Modes
There are a total of 8 viewing modes within the 4 categories, this is a list of all the modes based on
the Number given in the command protocol:
1 - Full Screen
2 - Dual (Split)
3 - Dual (PiP)
4 - Quad (Equal)
5 - Quad (T-Quad Right)
6 - Quad (T-Quad Left)
7 - Quad (T-Quad Bottom)
8 - 9X
One of the four Mode Select buttons (FULL, DUAL, QUAD, and 9X) can be used to switch the current
viewing mode. For the options with multiple viewing modes, multiple presses of the mode button will
switch to a different variation within that same mode. Please refer to the viewing mode list above for
more detail on these modes.
The IN/OUT buttons can be used to select which inputs are displayed in modes 2-8 for specific
outputs. The button sequence is as follows:
IN -> # -> OUT -> # to set a specific input to output.
