Assembly
When assembling your steam mop, there may be a little water in the water tank. This
is because we test all our steam mops 100% before you buy them, so you get a quality
steam mop.
1.
Remove all the parts from the package. Verify all the parts are included.
2.
Insert the lower tube into the folding handle as shown. (fig.1)
3.
Insert the assembled tube into the base of the steam mop. gently push down on
the tube until you hear it click into place. (fig.2)
IMPORTANT
Always make sure the steam mop is unplugged from the electrical outlet when not in use,
or before filling the water tank.
fig. 1
fig. 2
5
Summary of Contents for Steam Mop Plus
Page 2: ......
Page 16: ...MADE IN CHINA...
