Smart-IR ZB2812IR, User Manual, Page: 31 / 36

Ι Move the arrow indicator to COLOUR to select the desired colour of each area cells by using the Left /
Right button to select between the 15 different colour.
RETURN : Move the arrow indicator to RETURN after completing the setup to return to SPECIAL menu.
4-3) SYNC : INT (Internal Synchronisation)
Move the arrow indicator to RETURN after complete the setup to return to SETUP menu.
5. DEFECT
You can eliminate white spots (defects) up to max 128 points.
SENS-UP : To eliminate defects, set the high level of sens-up. You can set to max 64x, but 32x is best
to eliminate defects.
DIFF : You can set the size of DEFECT from 1 to 6.
START : Press the "ENTER" button, it will start to eliminate defects "PROCESSING NOW..." will be displayed
on the monitor.
In case of manual IRIS lens, you should cover the lens.
DEFECT
COVER THE LENS
THEN
PRESS ENTER KEY
PROCESSING NOW...
SENS-UP
DIFF
START
RETURN x32
RET
4