46
(a) Arm/Part-Arm/Disarm:
You can arm up the entire system by using Arm or partial arm (example: devices located at 1st floor
only) by using Part-Arm. Select Disarm to disable system's Arm or Part-Arm status. Only after
you have armed the system you will be able to receive Email/Push Notifications (see System
Setting/Notifications Setup for detail).
You will have 30 seconds to exit the premise after initiating the Arm or Part-Arm function.
(b) Camera:
Activate selected camera(s) for sudden recording needs.
(c) Panic:
Activate selected camera(s), siren(s) and power switch(s) for emergency recording, alarm sound
and/or lighting needs.
By default, the sensors will appear in the control group list after you have paired the sensors to
the SmartBox. Please follow the next steps to edit the One-touch Scenario.
Setup the One-touch Scenario
To setup customised one-touch scenarios (Arm/Camera/Panic), please go to the Scenario
section and follow the next steps:
Manual-2.0-Final_Layout 1 04/04/2016 17:32 Page 46
