NVME-M.2-1TB SSD Module and Hardware Kit Quick Start Guide
SMART Embedded Computing, 2900 S. Diablo Way, Suite 190, Tempe, Arizona 85282
If you are installing a second SSD into the top slot of the M.2
on-board connector:
6 Secure the lower SSD module to the PCB using the parts shown
in diagram
C
, in this order:
(2) Washer
(3) Standoff (collar)
7 Insert the SSD module (5) into the top slot by aligning the notch
on the SSD with the small slot on the M.2 board, as shown in
diagram
A
.
8 Secure the SSD module to the PCB using the parts shown in
diagram
C,
in this order:
(2) Washer
(1) Screw
Note:
The collar standoff (3) sits between the top and bottom
SSD modules.
9 Use the tools and torque recommendations in
and
10 Reinstall the blade into the system.
© 2019 SMART Embedded Computing™, Inc. All rights reserved. The stylized “S” and
“SMART” is a registered trademark of SMART Modular Technologies, Inc. and “SMART
Embedded Computing” and the SMART Embedded Computing logo are trademarks of
SMART Modular Technologies, Inc. All other names and logos referred to are trade
names, trademarks, or registered trademarks of their respective owners. These materials
are provided by SMART Embedded Computing as a service to its customers and may be
used for informational purposes only. For full legal terms and conditions, visit
www.smartembedded.com/ec/legal.
Technical Assistance
Visit our web site for the latest versions of SMART EC technical
documentation:
https://www.smartembedded.com/ec/support/
Get More Information
For technical assistance or to report product damage or shortages,
contact your local SMART Embedded Computing sales
representative or visit
https://www.smartembedded.com/ec/support/
.
