Smart Electronic Mirage CX06, Quick Start Manual, Page: 22 / 24

smartSTREAM
22 ENGLISH
4.2 BOX2IP
1. Connect your PC or your mobile device via
LAN or WLAN with the router in your home
network. For this, pay attention to the re-
spective notes in the manual of the mobile
device.
2. Install on your mobile device a SAT>IP
app, e. g. the Elgato SAT>IP app:
- for the operating system iOS from the
Apple App Store and
- for the operating system Android from the
Google Play Store.
3. Run the SAT>IP app. Receiver and PC /
mobile device will be connected with each
other via LAN / WLAN. If the connections
are ok, you will see the receiver as Sat>IP
server in the app menu.
4. If you do not see it, check the LAN / WLAN
connections. If there are several reachable
Sat>IP servers, they are shown respective-
ly. Select the desired device.
4.2.1 Live-TV on your TV Set
Simultaneously with the start of the Sat>IP app
the receiver channel list will be reduced. It now
contains only those channels broadcasted via
the same transponder as the current TV chan-
nel.

In between this channel list you can switch
channels with the remote control of your
receiver.
4.2.2 BOX2IP Mode

Press the key BOX2IP or go in the menu
Media
to the menu item
BOX2IP
an press
OK, to set the receiver into smartSTREAM
mode. On the TV screen you see now the
"BOX2IP" OSD screen instead of the TV
image.
On your mobile device you have now a com-
plete channel list, containing all channels which
are broadcasted via the satellites you set in
section 0.

Switch the channel directly on your mobile
device.

During BOX2IP mode you can
switch off your TV set.
4.2.3 HDTV Streaming
Streaming of HDTV programs is disabled by
default
(see note on page 21). Proceed as
follows to activate HDTV streaming:
1. Navigate to the sub menu
Other
in the
menu
System setup
and press OK .
2. Select the menu item
HDTV Streaming
and select
HDTV Streaming On
by using
the keys V+ and V-.
4.3 Small2Big
1. If your PC or mobile devices are not yet
connected to the router in your home net-
work, establish this connection (see
above). Please refer to the relevant instruc-
tions in the manual of the network terminal.
2. Install on the network device an app that
can detect a Digital Media Renderer (DLNA
DMR) and can use it as a playback device,
such as "Media Connect", "BubbleUPnP"
...

Newer Windows systems are DLNA
compatible by default, and therefore
DMR compatible (regarding play-
back on a media renderer...).
3. Press the key IPTV or
navigate to the menu
Media
, navigate to
Small2Big
and press OK.
On the TV screen "Small2Big standby" ap-
pears. The receiver waits to receive an AV
stream.
4. Start the app which can connect to the
DMR and check in the app settings,
whether the receiver is selected as render-
er.