Extended Settings and Functions
smart CX71
51
7.11
Simultaneous Playback of Picture and Sound
Asynchrony between the image and the sound signals might for example
occur in your home cinema system due to the use of long cables. Your
smart
CX71 offers the possibility to balance this by slightly shifting the
audio against the video signal.
1.
Select in the menu
System
Setup
the submenu
Other
and press
OK
.
2.
Select
AV Sync Value
and set a value of shift between
-500ms
and
+500ms
using the keys
und
(factory default is
AV Sync Val-
ue
0 ms
).
7.12
ANT IN / OUT Loop Through (Loop Standby)
Basically, after turning off the receiver it switches to power saving mode
("Deep Standby", red LED lights up). At the ANT OUT terminal there is no
or only a highly attenuated signal. If you want to use ANT OUT anyway,
you can set that in the submenu Other of the System Setup menu:
Select Loop Standby to switch on and off the possibility of looping
through the satellite signal, using the buttons
und
(factory
default is Loop Standby
off
).
CAUTION!
If you select Loop Standby
On
, the receiver goes into
standby mode after switching off, but not into the pow-
er saving mode. The display shows the current time.
7.13
SmartLink (CEC)
If you have a CEC
8F
9
-compatible TV set, and receiver an TV set are con-
nected via HDMI you can switch on and off (standby mode) both sets with
the remote control of your smart
CX71:
1. Select in the menu
System
the submenu
TV System
and press
OK
.
2. Select
SmartLink
and use the keys
und
to switch the
SmartLink function on and off.
9
CEC = Consumer Electronics Control = HDMI feature for entertainment units, provides via
HDMI various control functions, e. g. "one touch recording" or "system standby". The TV set
is the control center and the TV remote control becomes the remote control of the whole
system.
