2. Connect Transmitter to the signal sources
For Two High Definition (RGB/YPrPb) Sources
2.1
Connect the RGB video output of the source device to the first HD15
input on the transmitter using a standard VGA cable.
2.2
Connect the RGB or YPrPb video output of the source device to the
second HD15 input on the transmitter, using a Smart-e interface
cable if necessary.
For One High Defi Two Standard Definition Sources
2.3
Connect the RGB video output of the source device to the first HD15
input on the transmitter using a standard VGA cable.
2.4
Connect the Y/C video output of the source device to the 4-pin
minidin connector on the transmitter using a standard Y/C cable.
2.5
Connect the CVBS video output of the source device to the RCA
connector on the transmitter, using a Smart-e interface cable if
necessary.
Installation and Operation
-
4-
