ECC160 – User Manual
6
Smart-Cover , 1km Lagada-Thessaloniki , P.C.57200,Tel. +302394020077 Email: [email protected] , Website: www.smart-cover.gr
6. Close the water tank lid making sure it is well tight.
3.3Security Bubbler
The bubbler is located
laterally in the machine and
serves two purposes: cleaning the Hydrogen gas and act as
a safety barrier against a flame. If a flame reaches the bubbler and ignites the reduced hydrogen accumulated
at the top of the bubbler but the water column will prevent the flame to reach the main tank where there is
much more hydrogen accumulated.
The bubbler is to be filled with a light acid solution like vinegar until half of the volume. For filling the bubbler,
please follow these simple steps:
1. The solution to use is a light acid, like vinegar (Ph 3);
2. Open the threaded cap positioned on the top of the bubbler;
3. With a small funnel, pure gently the solution and check at the same time the level rising inside the lateral
hose of the bubbler;
4. Stop pouring when the level reaches the correct level;
5. Close the threaded cap. If necessary add a little bit of Teflon tape to tight it better.
