ASSEMBLY INSTRUCTIONS
TITAN LOUNGE
For product care, information and warranty details please visit
www.synargy.com
Step 1
Remove all packaging and set aside in a safe location
before disposal or recycling applicable materials.
On the underside of the recliner there is a package
containing the power supply - cut the ties to remove
the packaging and set the power supply aside.
Step 2
Place the back rest facing down on the seat base. The hand controller remote is bundled into packaging
attached to the seat back. Remove packaging and set remote aside carefully before proceeding.
Lift back rest to align the metal receivers with the metal posts of the chair base.
Allow the posts to slide into the receivers and press down fi rmly on the top of the backrest until a click is heard
on each side.
Step 3
Connect the electrical connections in the back of the seat.
Step 5
Plug the power supply into the outlets located at the bottom right of the seat base, and plug into a wall outlet.
Your recliner assembly is now complete. Please ensure you have read the safety and electrical instructions
before operating.
Scan QR code for a
video of this step
RECLINER
Make sure all plugs are connected on the product before plugging the power cords into a
wall outlet - otherwise product damage may occur. The USB ports (where applicable) are
designed with working voltage of 5V and can NOT be used to supply power for laptop
computers (neither PC or Mac). Plugging a laptop computer to the USB port may end up
damaging either the computer or the USB port due to unmatched working voltage.
Step 4
Replace the fabric back covers and fasten with
velcro on the underside of the seat base.
Step 5
Take the back rest wings (item c) and slide onto the
sides of the backrest using the interlocking brackets.
