Smart Caregiver TL-2015R2, Installation And Use Instructions Manual

Page: 14 / 29

14
Repeat these steps to add all other devices.
- Show record
Move to “List Rec. [nn]”.
Where, “nn” is the number of record that stored within the system.
And select it with C-Key, it shows below.
Where : “*”, valid record, if no character at this position, it means no record at that position.
“nn”, record-number, its range is from “01” to “30”.
“RR”, room-number, its range is from “00” to “25”.
“B”, bed-number, its range is from “0” to “9”
“XXXX”, serial-number (ID) of the recorded TM-04.
Use A-Key to show next record. When it show “:> <QUIT>”, applying Caregiver key can then quit the
list function.
Or when it is showing a empty position (No record position), applying Caregiver key , it shows,
Uses A-Key then to conirm to quit, or use Caregiver key again to cancel it.
- Delete record
There are two ways to delete records.
Delete a record:
To delete a record, go to the list rec. function irst, and then use Caregiver key when displaying a
valid record,
## Room Bed S/N
* nn RR B XXXX
<Quit>
Cordless PAD
:> Add Rec. [nn]