SMART Board M600i6, Configuration And User'S Manual

Page: 29 / 96

Chapter 4
21
Chapter 4: Maintaining your interactive
whiteboard system
Maintaining your interactive whiteboard 21
Preventing damage to your interactive whiteboard 21
Keeping the writing surface clean 22
Cleaning the projector 22
Focusing and adjusting the projector image 23
Replacing the projector lamp 23
Removing and replacing the projector lamp module 23
Resetting the lamp hours 27
This chapter includes methods for properly cleaning and preventing damage to your
SMART Board M600i6 interactive whiteboard system.
Maintaining your interactive whiteboard
For information on maintaining your interactive whiteboard, see the SMART Board M600
interactive whiteboard installation guide ( smarttech.com/kb/170555 ).
With proper care, your SMART Board interactive whiteboard will provide years of trouble-free
service.
Preventing damage to your interactive whiteboard
Although the surface of your interactive whiteboard is very durable, take the following precautions
to prevent damage.
l
Don’t use sharp or pointed objects, such as ballpoint pens or pointers, as writing tools.
l
Replace the pen nib when the nib wears out.
l
Don’t use low-odour dry-wipe markers because they can be very difficult to erase. Use
standard (high-odour) dry-wipe markers that show a warning to use them only in well-
ventilated areas.
l
Don’t use adhesive tape on the interactive surface.
l
Don’t use abrasive erasers or harsh chemicals to clean your product.