SMART Board Board 600iv, Configuration And User'S Manual

Page: 23 / 90

Using the remote control buttons
The projector remote control enables you to access on-screen menus and change projector settings.
Use the Power button on the remote control to put the projector into Standby mode or turn it on.
You can also use the Input button on the remote control to switch sources on the projector.
Number Function Description
1 Input Select an input source
2 Menu Show the projector menus
3 (Left), (Right),
(Up) and (Down) arrows
Change the menu selections and adjustments
4 Hide Freeze, hide or display the image
l
Press once to freeze the image.
For example, you can display a question on
the screen while you check your e-mail.
l
Press again to hide the image, that is, to
display a black screen.
l
Press again to return to the live image.
5 Mode Select a display mode
6 Mute Control mute settings from your audio output
device (not included)
7
(Power)
Put the projector into Standby mode or turn it on
8 (Enter) Accept the selected mode or option
9 (Volume Up) Increase the volume
10 (Volume Down) Decrease the volume
Adjusting projector settings
The remote control’s Menu button enables you to access the on-screen display to adjust the projector
settings.
C H A P T E R 3
Using your interactive whiteboard system
13