12 |
INSTALLING YOUR SMART BOARD 685IX PREMIUM INTERACTIVE
WHITEBOARD SYSTEM (APPLIANCE-BASED)
4. Using a Phillips No. 2 screwdriver, insert a bolt through the left pen tray bracket
into the left captive nut in the wall mount. Repeat with the right pen tray bracket.
NOTE
Don’t tighten the bolts at this time. Leave them loose so that you can slide the
interactive whiteboard sideways to align it with the projector’s image. See
Aligning your interactive whiteboard with the projector
5. Connect the USB cable from the SMART Hub to the interactive whiteboard
controller module’s captive USB cable.
Completing your installation
Refer to the following procedures to finish installing your interactive whiteboard
system.
Aligning your interactive whiteboard with the projector
To align your
interactive whiteboard
with your projector
1. Plug the projector’s power cable into a wall
outlet, and then use the remote control to turn
on the projector.
2. Follow the procedures in the
SMART Board
685ix Interactive Whiteboard System
Configuration and User’s Guide,
document
99-00984-20, to align the projector.
3. Slide the interactive whiteboard from side to
side, while holding the bottom frame of the
interactive whiteboard, to center the board on
the projected image.
4. Tighten the bolts holding the pen tray brackets
to the wall mount.
