4-Port Ultra 4K-60Hz HDMI KVM Switch with USB 2.0 and Audio
5
INSTALLATION
1. Ensure that power is disconnected from the UHDN-4P.
2. Connect the HDMI cables and USB cables (male-A to male-B) from the computers to the respective-
ports on the UHDN-4P.
3. Optionally connect audio cables from the computers to the respective ports on the UHDN-4P.
4. Optionally connect RS-232 for control functions.
5. Connect the USB keyboard and mouse to the two USB ports with keyboard and mouse symbols.
6. Optionally connect speakers to the UHDN-4P.
7.
Optionally connect up to 2 USB peripheral devices such as printers or flash drives.
8. Connect the display monitor to the OUTPUT connector on the UHDN-4P.
9. Power on the UHDN-4P.
Note:
The 2 USB ports on the right are dedicated for keyboard and mouse with full emulation. The 2
on the left are for other USB peripherals (flash drives, printers, etc.)