14
Section 3
Using the PresenterWall Software
3. Using PresenterWall Software
1. To begin using the PresenterWall application;
Open the application by selecting Start / All Programs / PresenterWall /
PresenterWall Manager
Or by clicking the Presenter Manager icon on your desktop.
2. When using PresenterWall for the first time
A dialog box will appear with a default IP address of 127.0.0.1
In the Username/Password fields use the Administrator user you created
during the installation. Click ‘OK’
PresenterWall Manager
1. Once in the PresenterWall Manager window, you will see the following: (Figure 3.1)
Clients:
This is the user you created during installation.
Connected mangers:
This is the station manager window you are currently
looking at.
2. You must have a Client running. If you do not see a Client running in this dialog
(bright green screen next to client), open the client from your start menu. (Start /
Programs / PresenterWall / PresenterWall Client)
3. You will see a blue “P” icon when the client is loaded and a red “P” icon when the
manager is loaded. You will also see an icon for the Cursor Finder as well. (Figure
3.2)
Cursor Finder
Note:
Occasionally while using PresenterWall software, your mouse cursor might get lost on
one of the other displays. Typing ‘Alt’ + ‘F1’ will center the cursor on your primary display.
To configure the ‘Cursor Finder’ hot-keys;
1. Right click on the ‘Cursor Finder’ icon located on your task bar.
2. This brings up the ‘Cursor Finder’ dialog. (Figure 3.3)
3. Once you have configured the hot-keys select ok to ‘OK’ to keep the settings or
‘Cancel’ to cancel.
Summary of Contents for PresenterWall
