OVEVIEW
The KLX-500-1U is an industrial-strength DVI-D with
VGA input support and KVM signal extender capable of
transmitting 1080p HD video to displays up to 500 feet
away via CAT5e/6 cables over LAN.
The KLX-500-1U also offers full USB keyboard, video, and
mouse operation extension for local and remote real-time
system management; great for supervising and managing
projects from the convenience of your personal workstation.
KLX-500-1U is plug-and-play ready for easy set-ups, ais
plug-and-play ready for easy set-ups, and chainable with
other KLX extenders to connect with workstations over 500
feet away. A simple yet powerful system enhancing tool
for any working environment. Don’t let distance limit your
systems: go further with the KLX-500-1U.
FEATURES
•
Extends KVM operation by 500 feet via LAN
(Cat5e/6 cables)
•
Chainable for thousands of feet of extension
•
Supports DVI monitors
•
Integrated VGA-to-DVI source converter
•
Supports full USB Keyboard-Mouse emulation
•
Audio input and output
•
Supports dual Keyboard, Video, Mouse control
operation with KVM devices
•
Supports 1080p up to 1920x1080 resolution
at 60 Hz
•
Plug-and-Play ready; industrial enclosure
1. Power off all devices prior to connecting them.
2. Connect the KLX-500-1U-TX transmitter to the computer with a USB Type A to Type B cable.
3. Connect the computers DVI output to the KLX-500-1U-TX DVI input. See Note below if VGA output is required.
4. Optionally connect the computers audio and microphone jacks to the KLX-500-1U-TX.
5. If you want local access you may optionally connect a DVI monitor to the DVI output on the KLX-500-1U-TX and a USB
keyboard and mouse to the KLX-500-1U-TX USB ports marked for keyboard and mouse.
6. Connect a CAT 5/5e/6 cable to the KLX-500-1U-TX.
7. Connect a CAT 5/5e/6 cable to the KLX-500-1U-RX.
8. Connect a DVI monitor to the DVI output on the KLX-500-1U-RX.
9. Connect a USB keyboard and mouse to the KLX-500-1U-RX USB ports marked for keyboard and mouse.
10. Optionally connect speakers and a microphone to the KLX-500-1U-RX.
11. Power on all devices.
12. Press and release the SW button on the KLX500-RX to learn EDID from the connected monitor. The Link LED will go out
and come back on flashing once the EDID is learned.
* NOTE: You can connect a computers VGA output port using a VGA to DVI-I Adapter on the TX DVI input port. The RX DVI
output port is compatible with VGA. The TX DVI output port is not compatible with VGA.
HARDWARE INSTALLATION
KLX-500-1U-TX FRONT
KLX-500-1U-TX BACK
KLX-500-1U-RX FRONT
KLX-500-1U-RX BACK
