9-Port KVM HD Multiviewer for a Single Monitor
7
Each section of the display can be considered a separate “output”. To configure input and output for
any of the 8 display modes the following command is used:
IN -> [select input 1-9] -> OUT -> [select output 1-9]
ex. Dual Mode (split)
Input 1 is display on Output 1. Input 2 is displayed on Output 2
To change Output 1 to display Input 3
INPUT -> 3 -> OUTPUT -> 1
To change Output 2 to display Input 4
INPUT -> 4 -> OUTPUT -> 2
