Introduction
The DV500 extends any DVI-D signal with PS/2 mouse
and keyboard up to 500ft with single UTP Cat5 cable.
Features
Top Image Quality at all Resolutions.
Video Resolutions up to 1600 x 1200 @
60Hz (1280 x 1024 @ 75Hz). on all distances
up to the maximum distance.
User selectable: DCC-Information used from
the remotely located monitor, from the locally
located Monitor or from an internal DDC
Table.
Basic device to remotely locate Touch Screen
and Sound.
PS/2 Mouse.
Maximum Screen Resolution on all distances:
500 ft w/ STP Cat5e.
Compatible with all operating systems.
Applications
Perfect Image Quality at all Resolutions.
Call Centers (co-locate user’s computers).
Industrial (protection against pollution).
Information Terminals & Kiosks.
Airports (air traffic control, passenger
information
systems).
Medical - using computer tomographs generates
strong magnetic fields, which make it impossible
to use monitors.
Installation
To install your DVX500
1.
Turn off computer and monitor.
2.
Connect your keyboard, monitor(s) and mouse
to the remote unit (depending on device type).
Please insure that the mouse and keyboard are
connected properly.
3.
Using the supplied CPU KVM cable, connect the
keyboard, monitor(s) and mouse connectors on
the computer. Please insure that the mouse and
keyboard are connected properly.
4.
Connect a shielded Cat 5e cable
between the DVX500-TX and the DVX500-RX
7.
Connect the power supplies to the transmitter
and receiver.
8.
Turn on the monitor and computer.
Installation Diagram
Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8
Connectors:
RJ-45
Capacitance:
14 pf/ft (46.2 pf/m)
Conductor Gauge: 24 AWG
Impedance:
100 +/- 15 ohms
4 - Pair, (stranded) Foil Shielded
Prepairing System CAT5e Cable
Keyboard
Mouse
DVI
DVI In
DVI Out
PS/2 Mouse
/ Keyboard
Power 5V
Power 5V
UTP Cat5e
Keyboard Mouse
Output
Input
PS/2 Keyboard
PS/2 Mouse
DVID
DVI
DVX500 Transmitter
DVX500 Reciever
