9
CONTROL USING ON-SCREEN DISPLAY (OSD) WITH THE FRONT PANEL
(Continued)
Figure 9-1
To change modes with the OSD navigate using the following buttons on the front panel shown in Figure 9-1:
1 = Down, 2 = Up, 3 = Back, 4 = Select, FULL = Enter
Individual Mode:
(Routing individual inputs to individual output displays.)
Figure 9-2
1. Press the MENU button and use the 1 (Down) or 2 (Up) buttons to highlight Individual.
2. Press 4 to display the 4 inputs (Displayed as Users.) Press the 1 (Down) or 2 (Up) buttons to highlight the
desired input number.
3. Press 4 to display the 4 outputs. Press the 1 (Down) or 2 (Up) buttons to highlight the desired output dis-
play number.
4. Press FULL to rout the input to the desired display.
To rout another: Press 3 to move back to the list of inputs. Repeat steps 2-4 above.
Once you’re in Individual mode you can rout inputs to a display by pressing the display number followed by
pressing the input number.
The on screen display will disappear after a few seconds of inactivity or you can press MENU to make the on
screen display disappear. The 4K-Wall will remain in Individual mode and you can change the displays by
pressing the display number button followed by the input number button.
