Helpful Hints
Read all Important Safeguards and Operating Instructions before using this kettle.
Discard the first filling of boiling water to remove any dust and residues from the
manufacturing process.
Standby Mode:
1. Never try to boil water with the lid open.
2. Do not leave water standing in the kettle. Discard unused water.
3. If the kettle is "ON" without water, the kettle will automatically turn off (the blue
indicator light will turn off).
4. If you remove the kettle during heating – before Auto Shut-Off – the blue
indicator light will turn off.
WARNING: Never fill above the MAX line. Overfilling can cause boiling water to
leap out of the pouring spout. This can cause severe injuries and burns.
4. Close lid.
5. Place kettle on Power Base.
6. Plug cord into wall outlet.
7. Press the power button on the handle. The blue LED light will turn on and boiling
will commence.
8. Once the water reaches 100°C, the blue LED light will turn off, and the kettle will
return to standby mode.
Keep Warm Mode:
1. Press the button and cycle through the following temperatures: 40°C, 50°C,
60°C, 80°C and 90°C. The LED screen will flash for 3 seconds and then lock in the
temperature.
2. When the water temperature drops lower than the selected temperature, the
kettle will reheat the water automatically.
Cancel Boiling:
1. Hold down the power button for 1 second to return to standby mode.
Cancel Keep Warm Mode:
2. Press the power button 3 times, or hold down for 1 second to return to standby
mode instead of keeping warm.
Page 4
