6
7
Model: BulbLite
2
Input: 5VDC
200m
A
Max: 0.5
W
IP68
Made in PRC
pack contEntS
English
buLb cHaRGinG dock and cHaRGinG
• The bulb must be charged before it is used for the first time and regularly after that (to
prevent damage to the battery).
• Plug in the charging base.
• Place the light on the charging base.
• The bulb gently glows red to indicate that it is charging.
When the indicator turn green, the battery is fully charged.
Allow approximately ten hours to fully charge an empty battery.
+
DiffuSer
liGht BulB
(BuBlite2)
retractaBle
hanDle
charGinG Dock
remote control
(PEbblE2)
not
proviDeD
(option)
pRoduct pRESEntation
charging dock
- do not use near a heat source. Keep away from fire.
- Keep out of reach of children.
- do not touch the base of the charging dock being powered.
- do not try to dismantle or open the charging dock; your
guarantee will automatically be invalidated.
- unplug the charging dock after the lamp has charged.
- do not use outdoors. Store in a dry place.
light
- Do not expose to fire or other sources of intense heat.
- do not try to dismantle or open the light; your guarantee
will automatically be invalidated.
- do not connect the light to another device.
- Charge the light regularly: the battery deteriorates after a
few months without charging.
- do not attempt to charge the light using a charging dock
other than the one provided.
- Take care of your light, the diffuser can scuff.
pREcautionS
carefully read and save these instructions before using the product.
use it according to the instructions given in this
user manual. failure to do so will invalidate your guarantee.
> For any questions relating to the proper functioning of this product, please contact your point of sale.
opERatinG ModES
SwitcHinG on/oFF
Briefly press
this button to switch on the light.
push on this button
for 1second to switch of
the light.
Briely press
this button to
turn the light on in
white light, or changes the light color or mode.
=
=
control
buttion
control
button
SELEctinG a coLoR ModE (aMbiEncE)
Candle effect - leds flicker
Scrolls through all the colors
Candle effect - leds flicker
Candle
Candle blue
rainbow
7-coLoR cycLE
and
3 ModES
1s
In order to change to the next color mode (white) when in the RAINBOW mode, you need to turn the light off and
then on again.
control
button
=
a short click
on this button sets the
chosen color. a second click restarts
the color rotation,...
rainBow
*
dEactivatE oR activatE tHE REMotE contRoL Function
Deactivation:
Push on this button for 6 seconds
to turn off the the remote control function. The
light flashes 2 times to show that the function is
turned off.
reactivation:
Briefly press this button to
restart the function and turn the light on.
=
Turn off the remote control reception function in order to reduce the energy used by the light and maintain a
charge before prolonged storage (remember to recharge the battery before turning off the remote function)
control
button
6s
tEcHnicaL inFoRMation
tEcHnicaL cHaRactERiSticS
sans fil et
reChargeable
Radio range: 20m maximum (direct range)
Plastic diffuser (Pe) - Silicon access door (optional)
Shock and UV resistant
Waterproof: IPx8 to depth of 1 metre
Recommended operating temperature: 0 to 40°C
Product guarantee: 1 year
* if you are not going to use your light for over a month, you
should put the product in off mode, if not recharge regularly
the bulb (to prevent damage to the battery).
coMpLiancE
Unlimited light colors, 12 LEDs (8 white, 4 RGB)
LED power consumption: 0.5 W
Lithium-ion battery: 850 mAh 3,7V
Hours of lighting: approx. 6 hours depending on use
Battery life in Off mode: several months*
Charging dock power supply: 100-240Vac 50-60Hz
Bulb power supply: 5.35V 1A
Bulb charge time: 6h
Radio frequency: 433 MHz
*
shoCk and uV
resistant
waterproof
hours of operation:
approx. 6 hours
radio remote
Control
In the European Union (in accordance with Directive DEEE 2002/96/EC), and also in other regions, you must return this product to
a recycling collection point at the end of its life. as this product is not ordinary household waste, managing its end of life helps us
protect our environment and limit the use of our natural resources. for further information, please contact Smart & Green.
IPW Europe declares that this product complies with the following European directives: R&TTE (1999/5/EC), LVD (2006/95/EC),
RoHS (2011/65/EU), EMC (2004/108/EC) and Battery (2006/66/EC). The corresponding Declaration of Conformity
can be viewed on our website (www.smartandgreen.eu).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
6h
