ENET-710 – User’s Manual
7
Step 3
Default Configuration
Initially there is no password set, a username of admin, and the configuration web page is accessed
using the default IP address of 192.168.1.1 with a subnet mask of 255.255.255.0.
Using Locator
Another way to configure the IP address of ENET-710 module is using the Locator, obtained from
the Smar Laboratories web site (
www.smarlabs.com
). In order to make this, observe the steps
below:
1 – Open the Smar Labs web site:
www.smarlabs.com
.
Summary of Contents for ENET-710
Page 4: ...ENET 710 User s Manual IV...
Page 18: ...ENET 710 User s Manual 14...
Page 20: ...ENET 710 User s Manual A 2...
