Smalvic 1023850400 Instructions For Use Manual Download Page 23

23

 / GB

INSTRUCTIONS FOR USE

3.1  Maintenance and cleaning

Before each operation, disconnect the appliance from the mains.

After each use, when cool, clean the hob eliminating even the small residues 

which, when the hob is switched on again, can become impossible to remove.

Only use suitable products, avoiding steel wool pads, abrasive sponges and 

powder detergents as these products can scratch the surface of the glass.

Sprays to clean ovens are not suitable as they are aggressive and damaging for 

the surface of the glass.

Slight residue

 can be removed with a damp cloth or with hot soapy water.

Ring marks 

from soap can be removed with water which must be dried using 

a soft cloth.

Marks of scale,

 caused by boiling liquids overflowing from the containers, are 

removed with vinegar, lemon or an anti-scale product.

Eliminate

 residues of detergent as

, the next time they heat up, they could 

become aggressive for the glass.

For resistant and hardened incrustations we recommend using a scrape for win-

dows with a metallic blade which can easily be found on the market (see figure).

Do not use jets of steam for cleaning.

To remedy any anomalies of functioning, please contact qualified personnel.

MAINTENANCE

Summary of Contents for 1023850400

























Reviews: