a flashing “X”. When this happens, please change the battery immediately! To retain the time during
a battery change, be sure to first plug the unit into a 12 volt power source.
See the “Menu Options” section of the manual for other Clock controls and options.
Odometer Mode:
Your
ALFA-Club
contains dual odometers. In the Odometer Mode, your display shows these two
odometers on the left side of the display, and displays the Time of Day in the upper right corner. The
odometer is fully factor correctable (6 digit factor) like all other
ALFA
odometer products, and may be
setup to display miles or kilometers.
In Odometer Mode, pressing the HOLD button will alternately freeze and release the time and
distance on the display. These continue to progress unseen, and the up to date values are displayed
as soon as the Hold is released. (The Speed readout continues to update even during HOLD.) The
word “HOLD” appears in the lower right corner to remind you that the display is frozen.
The
switch controls the direction of the odometer. Pressing the
switch upward causes the
odometer to run forward, pressing it downward once parks the odometer (odometer off) and
downward again runs the odometer in reverse. Note that the shape of the decimal point in the
odometer display indicates the direction of the odometer.
The lower right corner of the display contains the battery condition when in Odometer Mode. The
indications are the same as in the Clock Mode.
See the “Menu Options” section of the manual for other Odometer controls and options.
Clearing:
Moving the center switch downward activates the Clear function. In Clock Mode, the Clear function
will erase all of the memorized splits. In Odometer Mode, the Clear function resets the second
odometer (incremental distance) to zero.
Setup Options:
The final
ALFA-Club
mode is the Setup Mode. This is where you set the clock, odometer factor, and
other operating features of the device. At any time during the setting of values or options, you may
move the switch to the SETUP position to abort and access the standard Clock or Odometer modes.
Whenever a menu appears, you will be asked to make a selection using the
switch. To select the
option on the top line of the display, press the
switch upward, and to select the option on the
lower line of the display press the
switch downward. For menus requiring that you enter a value,
the HOLD button will serve to enter the value.
ALFA-Club Owners Manual
5
045.376 10:02.78
002.400 43.4
