POWER AND CONNECT
POWER
1. Connect power to the monitor using the included AC power supply. If using a battery bracket (sold
separately), attach a compatible Gold- or V-Mount battery (26v required for Vision 24 & OLED 27).
2. Press the power button.
SIGNAL
All video signals up to DCI 4Kp60 are supported. For full UHD/4K compatibility, be sure to use a 12G-SDI
or HDMI 2.0 cable.
MOUNTING OPTIONS
CHEESE STICK MOUNTING RAILS
• Easily-swappable Cheese Stick Mounting rails can be replaced or swapped as needed (1/4"-20, 3/
8"-16, and blank plate options available).
DOVETAIL MOUNTING RAIL
• Accommodates Dual Gold-Mount or V-Mount Battery Brackets, as well as other accessories (cheese
plate, etc).
TERADEK BOLT 4K COMPATIBLE
• Easily connect Teradek Bolt 4K Receivers to any of the Cheese Stick Mounting points using a
mounting arm/bracket of your choice.
• Power your Receiver from one of the integrated 2pin power outputs, or sandwich between a battery
bracket and battery. (Note: this may impact performance depending on orientation of Tx/Rx
antennas).
• Connect Bolt 4K Receivers via SDI or HDMI.
SmallHD User Manual
Page 5
4K Production Monitor Quick Start Guide
