User Manual: 1.3-Megapixel Digital Camera
Page 5
the battery life indicator will show that the battery is being charged by scrolling from 1 to 3
ticks on the battery icon. When charging is complete, the battery indicator will remain solid
with 3 ticks.
Lithium-polymer battery tips
•
Safety note:
Always observe the precautions described in Section 8.
•
It takes approximately 3 hours to fully charge a depleted battery.
•
The camera can be charged at ambient temperatures between 0°C – +40°C.
•
The battery does not need to be fully discharged or exhausted before being recharged.
•
Lithium-polymer batteries lose their charge even when not used. So, be sure to
charge the battery before taking pictures.
•
To ensure that your battery lasts as long as possible, switch the camera off when you
are not using it.
•
The number of available shots will be lower at low temperatures. You can increase
the amount of power produced by putting the camera in your pocket or another warm
place to heat it just before taking pictures. If you are using a heating pad, take care
not to place the camera directly against the pad.
Turning on the camera
Move the power switch to the “On” position to turn on the camera. The LCD will turn on
when the camera turns on.
•
Note:
The camera has an automatic time-out feature to conserve battery life. When
timed out, the camera will not take a photo when you push the shutter button. Press
either the “Resolution” or “Sound” button to wake up the camera
.
