SMAI AIRFIT, Owner'S Manual, Page: 10 / 18

10
Assembly Instruction
FIGURE 4 Monitor Assembly
Step 1
Use the wire which is attached to the Console Mast (A11) to tie then lead the
Sensor Wire(Upper) (H04) from Main Frame (A01) to get through the Console
Mast (A11) till the top opening of Console Mast (A11)
Please note not to crush Sensor Wire(Upper) (H04) when assembling Console Mast
(A11) onto the Main Frame (A01) with two Screws ( B06) and two Washers ( D03)
as show as below picture.
Step 2
Well connect the Sensor Wire(Upper) (H04) to the cable of Console (H01),
then fix the Console (H01) onto the Console Mast (A11) per four Screws (B03).
Step 3
Insert Seat Post (A08) into Main Frame (A01), fixed by Pop Pin Knob (E09). Fix
Seat Pad (G12) on the Seat Post (A08). Seat Position can be adjusted from this
seat post to fit for your height.
FIGURE 4