background image

SMA Solar Technology AG

Legal Restrictions

User Manual

SB33_38-BA-BEN114230

23

The information contained in this document is the property of SMA Solar Technology AG. Publishing its content, either partially or 

in full, requires the written permission of SMA Solar Technology AG. Any internal company copying of the document for the 

purposes of evaluating the product or its correct implementation is allowed and does not require permission.

Exclusion of liability

The general terms and conditions of delivery of SMA Solar Technology AG shall apply.
The content of these documents is continually checked and amended, where necessary. However, discrepancies cannot be 

excluded. No guarantee is made for the completeness of these documents. The latest version is available online at www.SMA.de 

or from the usual sales channels.
Guarantee or liability claims for damages of any kind are excluded if they are caused by one or more of the following: 
• Damages during transportation
• Improper or inappropriate use of the product
• Operating the product in an unintended environment
• Operating the product whilst ignoring relevant, statutory safety regulations in the deployment location
• Ignoring safety warnings and instructions contained in all documents relevant to the product
• Operating the product under incorrect safety or protection conditions
• Altering the product or supplied software without authority
• The product malfunctions due to operating attached or neighboring devices beyond statutory limit values
• In case of unforeseen calamity or force majeure
The use of supplied software produced by SMA Solar Technology AG is subject to the following conditions:
• SMA Solar Technology AG rejects any liability for direct or indirect damages arising from the use of software developed by 

SMA Solar Technology AG. This also applies to the provision or non-provision of support activities.

• Supplied software not developed by SMA Solar Technology AG is subject to the respective licensing and liability agreements 

of the manufacturer.

SMA Factory Warranty

The current guarantee conditions come enclosed with your device. These are also available online at www.SMA.de and can be 

downloaded or are available on paper from the usual sales channels if required.

Trademarks

All trademarks are recognized even if these are not marked separately. Missing designations do not mean that a product or brand 

is not a registered trademark.
The 

Bluetooth

®

 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 

SMA Solar Technology AG is under license.

SMA Solar Technology AG

Sonnenallee 1
34266 Niestetal
Germany
Tel. +49 561 9522-0
Fax +49 561 9522-100
www.SMA.de
E-Mail: [email protected]
© 2004 to 2011 SMA Solar Technology AG. All rights reserved

Summary of Contents for SUNNY BOY 3300

























Reviews: