Opening and Closing
SMA Solar Technology AG
30
SL6000-TEN081820
Technical Description
8 Opening and Closing
8.1 Opening the Smart Load
1.
2.
Wait until the LEDs and, if applicable, the operation display of the Smart Load have gone out.
3.
Unscrew all four lid screws and set them aside.
4.
Pull the lid slightly forward.
5.
Disconnect the PE connection from the lid.
6.
Remove the lid and set it aside.
8.2 Closing the Smart Load
1.
Establish the PE connection to the lid.
2.
Fasten the lid to the housing using four screws.
3.
Commission the Smart Load as described in section 7 "Commissioning" (Page 29).
NOTICE!
Electrostatic discharges can damage the Smart Load.
•
Ground yourself before touching a component inside the Smart Load.
touching the inside of the Smart Load's housing.
DANGER!
Danger to life due to high voltages in the Smart Load.
•
Disconnect the stand-alone grid system.
•
Ensure that no voltage is present in the system.
Summary of Contents for SMART LOAD 6000
Page 2: ......
