SMA Solar Technology AG GRID-CONNECT-BOX 12, Operating Manual, Page: 15 / 40

SMA Solar Technology AG 5 Installation
Operating Manual GRID-BOX-12-3-20-BE-en-11 15
5.3 Preparing the Mounting Location
Dimensions of the drill holes for securing the Grid-Connect-Box:
Figure 7: Exterior base measurements and dimensions of the drill holes
Additionally required mounting material (not included in the scope of delivery):
4 suitable screw anchors for attaching the Grid-Connect-Box
Procedure:
1. On the support surface, mark the positions of the four drill holes for attaching the base.
2. Drill holes at the marked positions.
3. Insert the screw anchors.
5.4 Transport
5.4.1 Transport Options
The Grid-Connect-Box is delivered on a Euro pallet. You can use the following means of transport to lift the
Grid-Connect-Box off the Euro pallet:
• Forklift
• Crane with suitable fork
:$51,1*
Danger to life due to fire or explosion
Despite careful construction, electronic devices can cause fires if they are not installed properly. Contact with flammable
materials allows the fire to spread. This can result in death or serious injury.
• Do not install the Grid-Connect-Box on flammable construction materials.
• Do not install the Grid-Connect-Box in areas containing flammable substances or objects.
• Do not install the Grid-Connect-Box in potentially explosive atmospheres.