BATCAM 2.0
27
The range of images varies with the maximum value, such
as the sound pressure changing in the left graph, with the
minimum value changing with the maximum value.
If you raise threshold, it affects the beam power displayed
on the screen regardless of the setting value of the image
range. For example, if the minimum setting value for the
image range is less than the display reference value, as
shown in the graph on the left, then the display reference
value is set to the minimum value and displayed on the
screen.
3)
Image Average
This function sets the way the beam power image is displayed on the screen (beam power image average).
Depending on the type or characteristics of the noise, the user can set the appropriate average.
If there is no image average, the current noise is immediately displayed on
the screen. If you look at the graph on the left, the current noise is
indicated by a black line, and an orange dotted line shows the threshold.
The screen shows the part displayed by the rainbow colored chart, and
updates are made immediately for each frame that is processed. In these
settings, it is difficult to visually identify short-lived sounds.
Exponential
Average: Fast / Quick Response
This feature allows you to see changes in sound by applying different
average parameters depending on your selection options. Typically, you
can set it to Fast Response to measure it, and user can change it to slow
response so that it can be updated slowly.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
