SLT Tactic TTX850 Instruction Manual Download Page 28

28

FAILSAFE NOT WORKING CORRECTLY:

 Receiver is not properly linked to the transmitter – link the 

Rx to the Tx and re-try. Check the channels which are programmed for transferring from Tx to Rx in the 
transmitter’s programming. Contact Hobby Services for further details.

WIRELESS TRAINING FUNCTION NOT LINKING:

 Check to see that another Tactic 2.4GHz system is not 

on in your area. The problem might also be that the teacher’s and student’s transmitters were not powered 
in the proper sequence or are positioned too far from each other. Carefully follow the instructions on page 

19 for proper linking and operation for training.

RECHARGEABLE BATTERIES WON’T ACCEPT CHARGE THROUGH THE TRANSMITTER:

 Check 

the charger for proper setup and operation. Make sure the charge plug is inserted fully into the charge jack. 
Make sure the transmitter’s power switch is in the OFF position. Make sure the cells are inserted inside the 
battery compartment in the proper direction.

Contact Hobby Services for other problems.

The Academy of Model Aeronautics (AMA) has established a Membership Manual which includes a description 

of the AMA’s function and mission, insurance benefi ts, the Model Aircraft Safety Code, membership renewal 
information, and more. Model fl ying MUST be done in accordance within AMA guidelines in order for AMA 
liability protection to apply. See the website listed below, or contact the AMA for further details:

http://www.modelaircraft.org/fi les/Memanual.PDF

Academy of Model Aeronautics

 

(765) 287-1256 – Business

5161 East Memorial Drive 

(765) 289-4248 – Fax

Muncie, Indiana 47302 

(800) 435-9262 – Membership Services

                              http://www.modelaircraft.org

Practice good safety precautions at all times when fl ying model aircraft. The AMA can assist in locating 
authorized local fl ying clubs and fi elds.

The Tactic TTX850 transmitter is intended for use with radio control model hobby airplanes and helicopters. 

Use with non-hobby related products for non-hobby related activities is not recommended or encouraged. 

Any alterations or modifi cations to any parts of this product are not recommended. Tactic is not responsible 

for unauthorized repairs or modifi cations. All unauthorized repairs will void the warranty.

TACL0625  Tactic TR625 6 Channel Receiver

TACL0825  Tactic TR825 8 Channel Receiver

TACM0225  TSX25 Mini Digital High Speed 2BB Servo

TACM0235  TSX35 Standard Sport Servo

TACM0245  TSX45 Std High Torque Metal Gear 2BB Servo

TACM2001  Switch Harness w/Charge Plug Futaba J

TACM2020  4 Cell AA Battery Holder

TACM2090  Servo Extension 6” Futaba J

TACM2093  Servo Extension 12” Futaba J

TACM2500  Y-Harness 20” Futaba J

SAFETY GUIDE

ACCESSORIES

Summary of Contents for Tactic TTX850

































Reviews: