SLS smartSLED, Quick Start Manual

Page: 2 / 2

The following are various combinations of host platform, connectivity
and operating systems supported by smartSLED
TM
:
The smartSLED TM Bluetooth RFID Reader does not pair as a consumer
Bluetooth De vi ce, your smartREADER App will handle the pairing. The
smartREADER App is ava ilable for download from the App Store , and
Google Play .
To start developing software for your own customized application,
please download the source codes from the following web location:
www.slsrfid.com
The detailed User Manual is available for download from the
following web location:
www.slsrfid.com
The User’s Manual will show you how to operate the smartSLED TM
reader.
Android OS
iOS (Apple)
Linux OS
Windows
(5.0 or later)
(10.0 or later)
(4.0 or later)
(10.0 or later)
Phone, tablet
Phone, tablet
tablet
Laptop, PC
Bluetooth 4.0/4.1/4.2
Bluetooth 4.0/4.1/4.2
Bluetooth 4.0/4.1/4.2
USB, Bluetooth 4.0/4.1/4.2
Press the power button for 3 seconds and then release, the
GREEN power LED will light up, meaning the smartSLED
TM
is
powered on and the BLUE LED on the Bluetooth button will
start blinking indicating the unit is ready to Pair with a Host
device. �
The smartREADER App (see Figure 1 above) needs to be
installed on the Host device. Open the SLS smartREADER
App on your host device and press the“Connect”button
on the screen to have your Host device start searching for
the smartSLED
TM
for pairing. Once the smartSLED
TM
reader
has paired with the host device its name and MAC
address/serial number will appear on the screen. To finish
the pairing process, press on and select the smartSLED TM
device as shown on the screen.
On the smartREADER App, press the“Inventory”button,
on the next screen, then press the“Start”button.
Make sure there are RFID tags in front of the reader.
You will now see the tag IDs shown on the screen and the
host platform will be generating a beeping sound that is
proportional to the number of tag reads. If you do not hear
the beep, check the host device for muted sound.
You can use the Start/Stop button on the touch screen to
control RFID & Barcode Reading or you can use the Trigger
button on the gun handle to start and stop RFID & Barcode
reading. The trigger is under the application’s control.
Typically, pressing the trigger initiates an RFID or Barcode
scanning process and terminates it upon release.
For more detailed explanations of your particular
smartREADER App please refer to the User Manual
mentioned above.
1）
2）
3）
4）
5）
6）
7）
To power on smartSLED
TM
, press and hold the power button for
3 seconds and then release, after that the GREEN LED will light
up
1）
The Bluetooth pairing button will automatically start flashing on
power up, indicating the smartSLED
TM
is ready to be discovered.
At this point, use an application to connect the reader to the
host device.
2）
4. Powering on smartSLED
TM
:
5. Compatible Host Platforms:
Quick Start Guide
smartSLED TM Handheld RFID Reader
Bluetooth Pairing
Power
Bluetooth Pairing
Power
Trigger Button
6. smartREADER App Download:
7. User’s Manual Download:
Release 1.0
Copyright Smart Label Solutions 2017.
Reduce | Reuse | Recycle
8. smartREADER App to Start Reading RFID Tags:
9. Software Development:
Send technical inquiries by email to techsupport@slsrfid.com
10. Technical Inquires:
Fig 1. smartREADER App Screen