Blz. 10
11. Tuning
All Slootsmid macerators are adjusted at delivery. When changes in the adjustment occur during
assembly this can be readjusted. If you have any problems contact Slootsmid.
The closing tension of the cover can be adjusted by turning in or out the hinges and clamp closing.
When the macerator is in use it may not have false air this realizes a longer filling time. The cutting
filter also can leak in that case.
The knifes in the macerator should rotate on both sides of the comb 0,5 mm (see image below) in
between. Frequently check the adjustment for correct cutting. The knifes should be sharp for good
cutting.
When sharpening the knifes make sure the stay straight not round (see image below). Make sure the
comb stays straight and the edges sharp.
