INSTALLATION & INITIAL SETUP
3
Two “D”
batteries
Step 1 –
Insert fragrance bar under tab on
left retaining arm as shown above. Be sure
fragrance bar is against the spring-loaded
lever. The right retaining arm will need to
be pushed out to allow the fragrance bar
to be in final position. The fragrance bar
rests between the retaining arms and
upon the “teeth” at the bottom of the unit.
Step 3 –
The unit can
be set to run at high,
medium and low
fragrance outputs to
suit your needs. Move
the setting switch to the
desired output of fragrance.
High
Medium
Low
Step 2 –
Install two “D” batteries.
Note: To check if batteries need replacing, push
test button. Fan should cycle on for a few seconds
indicating batteries are in working order.
Step 4 –
Replace cover.
Note: As fragrance bar reduces in size, the
spring tension lever trips the low fragrance
indicator light switch. When the light is on,
it’s time to replace the fragrance bar.
Fragrance
bar
